To webview
 

Issue 1/2022 dated March 16, 2022

 

Your WIKA newsletter

Welcome to our first newsletter in 2022. Again this year, we have a lot planned – get ready for news and current topics from WIKA.

Have you already worked out your programme? Numerous trade shows are once more opening their doors to you this year – it's always worth stopping by the WIKA stand.

Enjoy reading our news.
We wish you and your family a nice and relaxing Easter.

Your newsletter editorial team

 

Our current topics

1. WIKA participation in trade shows in spring 2022
 
2. Development centre: Innovation process across 24,100 m2
 
3. Sustainability: generationally and environmentally friendly
 
4. Diaphragm seals for very hot process temperatures up to 450 °C
 
5. EMICOgauge pressure measuring system protects people and the environment
 
6. How are thermowells calculated?
 
7. Extending the accreditation for force
 
8. Be there – Calibration seminar 2022
 
9. Switch points in vacuum ranges: How are they set?
 
 
 
WIKA participation in trade shows in spring 2022

1. WIKA participation in trade shows in spring 2022

Over the coming weeks you'll again have the opportunity, at various events, to get to know more about our new products.

You'll find us at MSR special trade show in Frankfurt (23 March), Anuga FoodTec in Cologne (26 – 29 April), Control in Stuttgart (03 – 06 May), Expo-Lounges in Karlsruhe (17 – 19 May) and MSR special trade show in Halle-Leipzig (18 May).

We will be happy to welcome you at our stand!

read more To the MSR-Spezialmesse Frankfurt
read more To the Expo-Lounges
read more To the Anuga FoodTec
read more To the MSR-Spezialmesse Halle
read more To the Control
read more To the WIKA trade show schedule
 
Development centre: Innovation process across 24,100 m<sup>2</sup>

2. Development centre: Innovation process across 24,100 m2

With an area of 24,100 m2, the new development centre at the main site in Klingenberg has been completed and now brings together all departments involved in the innovation process. The facility enables new products and solutions for a wide range of measured variables to be brought to market readiness within a short time.

In 2022, around 50 jobs have been planned to reinforce the personnel in the development department. Furthermore, WIKA is also investing continuously in the expansion of its production sites worldwide. The group of companies has a total of 43 subsidiaries and more than 10,000 employees.

read more To the press release
 
Sustainability: generationally and environmentally friendly

3. Sustainability: generationally and environmentally friendly

Sustainable development is important in order that future generations can also share in finite resources. WIKA already complies with all national and international environmental legislation. In addition to the highest quality, continuous attention is also paid to energy savings in manufacturing. New buildings, for example, take energy efficiency into account and integrate thermal recovery systems.

Not only do we want to look back at what we have already mastered, but also set ourselves new goals for the future. With the new sustainability concept, we want to be a role model, because sustainability is a topic that affects everyone. Visit our website to find out more about sustainability at WIKA.

read more Further information
 
Diaphragm seals for very hot process temperatures up to 450 °C

4. Diaphragm seals for very hot process temperatures up to 450 °C

The new high-temperature diaphragm seal is combined with a capillary and a standard measuring instrument, without any additional cooling element, to form a measuring system. Its lower body, including flange connection, is made of a single piece, which minimises the risk of leakage.

Customer-specific seal geometries simplify the connection of the diaphragm seal to the process. The new instrument can be fitted with fixtures for a lifting aid, so it can be moved and installed effortlessly. Integrated flushing connections also enable the diaphragm seal to be cleaned without dismounting.

read more To the product page 990.45
read more To the press release
 
EMICOgauge pressure measuring system protects people and the environment

5. EMICOgauge pressure measuring system protects people and the environment

The EMICOgauge (emission control gauge) features the assembly of a 232.30 or 233.30 pressure gauge in a safety version in accordance with EN 837-1 (S3) and a valve to prevent fugitive emissions. An easily rotating adapter with a special sealing packing connects the measuring instrument and the valve.

In the event of a fault due to high overpressure, the S-3 safety version protects the user from injury. The S-3 pressure gauges can be combined with the following valves in fugitive emission design to form EMICOgauges: Model IVM monoflange as well as model IV1x and IV2x (block & bleed) needle valves.

read more To the product page 232.30, 233.30
read more To the valves and protective devices
read more Further information on the EMICOgauge
read more To the press release
 
How are thermowells calculated?

6. How are thermowells calculated?

Wake frequency calculations are nowadays part of every design of an industrial plant, since they fulfil an important task. They protect the temperature sensor as well as the personnel and the environment. Thermowells are very durable, but under critical conditions they can vibrate, which can cause the thermowell to break off.

Wake frequency calculations can solve this problem. In the case of a negative result, there are two ways to optimise the strength of a thermowell. These are explained in more detail in our new video.

We say thank you – thank you for now more than 10,000 subscribers on our YouTube channel. We appreciate every like, every comment and of course every additional subscriber. We are pleased that our videos are helpful and that people are enjoying watching them.

read more To the video
read more Thermowell wake frequency calculation software registration
read more To all videos
read more To the thermowells
 
Extending the accreditation for force

7. Extending the accreditation for force

In order to be able to guarantee process reliability, among other things, large amounts of test equipment are calibrated at defined intervals. The scope of accreditation in the WIKA Group for the measured variable of force has now also been extended to include DAkkS calibration certificates, which are traceable and accredited in accordance with ISO 17025.

The calibration is made in a measuring range of 50 N … 500 N and 1 kN … 200 kN with a measurement uncertainty of 0.1 % in tension and compression force direction in accordance with DKD-R 3-3 and DIN EN ISO 376 (calibration certificate per ISO 17025). Furthermore, in the measuring range of 50 N … 6 MN, with a system accuracy of 0.5 % in tension and compression force direction, a 3.1 inspection certificate in accordance with DIN EN 10204 can be issued.

Talk to us – we look forward to your enquiry.

read more To the calibration services
read more To the accreditation (in German)
read more To the calibration service for force measuring instruments
 
Be there – Calibration seminar 2022

8. Be there – Calibration seminar 2022

This year, WIKA is again offering a calibration seminar. Find out more about the calibration of pressure and temperature measuring instruments.

You can register easily via our website. We look forward to your registration for the calibration seminar in May 2022 and to welcoming you to the laboratories in our headquarters in Klingenberg.

read more Further information
 
Switch points in vacuum ranges: How are they set?

9. Switch points in vacuum ranges: How are they set?

Read our latest blog post to learn how to set the switch points of an electronic pressure switch for an application in the vacuum range and what points you need to pay attention to here.

In addition, register for our cost-free news subscription in order to be kept up-to-date by e-mail on topics that you can choose yourself. Our authors are happy to share their knowledge and to answer your questions.

read more To the blog post
read more To the pressure switches
read more To all blog posts
read more To the news subscription
 
 
 
 
Websites
 
Wika Webseiten und Shop Icon

Find out more about the group of companies.

Pfeil nach Rechts To the website
 
Pfeil nach Rechts To the online shop
 
   
 
   
 
   
 
 
WIKA blog
 
Wika Blogs

Inform yourself about our latest blog posts.

Pfeil nach Rechts To the blog
 
Pfeil nach Rechts To the news  
subscription
 
   
 
   
 
   
 
Social media
 
Wika Social Media

Take a look at our WIKA social media channels.

Pfeil nach Rechts To the LinkedIn page
 
Pfeil nach Rechts To the YouTube  
channel
 
Pfeil nach Rechts To Instagram
 
   
 
   
 

© 2022 WIKA Alexander Wiegand SE & Co. KG

 
Editorial team, WIKA newsletter

WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Straße 3‌0

63911 Klingenberg

Germany

Tel.: +49 9372 132-0

Fax: +49 9372 132-423

newsletter@wika.de
Pfeil nach Rechts WIKA website
 
Pfeil nach Rechts Legal notice
 
Pfeil nach Rechts Unsubscribe from newsletter
 

The reprint or adoption of single reports and articles is only permitted with the express authorisation of the company WIKA. All rights reserved. WIKA is not responsible for the completeness, correctness and currentness of the supplied information. Neither is WIKA responsible for the contents and services offered by external sites, which are directly or indirectly referred to by hyperlink in the newsletter.

You will receive this e-mail once you have entered your e-mail address in the distribution list on our website. Here you can subscribe to or unsubscribe from the WIKA newsletter as you please.

If you have questions or would like to contact us, you can reach us at newsletter@wika.de .